Note - printing:

1, single page way of printing

Make-up Center (vertical line) with 6 mm side stitching local hemorrhage, that every single page four were left 3mm hemorrhage (demand cut two knife).

To clarify: if you do not print bleeding pictures, shading, or color shading is perfect, can make up by 1 ways, a knife to the center.

2, the make-up of the envelope

When ordinary manufacturing, we used the envelope with "tongue" all together, this paper compare fees (a blank application, but no good continuation pattern).

Another is to cover to cover, "tongue" do, do, paper, but a "paste", i.e. when a rubber scraping process (or paste a double-sided tape).

3, packing box layout

The general packing box (beyond 8K) do not have to pay up for direct printing

Below briefly introduce small package imposition.

As far as possible in the open under the premise, to do the most compact makeup tasks, but the packing box involved after the process more, rolling box (cutting edge and crease line) is the most crucial, then need to pay attention to the two line spacing make-up ratio is not less than 3mm, or when the knife row version will be very troublesome, so as to affect the quality of products.

When you finish the makeup (by the customer sign, best can agree with) a large knife original version of the film, knife to facilitate printing factory.

4 types of cards, card

To do card copy typing allies have such experience, a business card paper 8 card, then cut out by cutting machine. In fact, it is a waste, my experience is a business card paper can do 10 business card, no card machine, if the number of words, can use the ruler, knife, if a large number of paper cutting machine, printing factory, use is very convenient, and very save. If only the one or two card box, it is just that your hands riotous with colour, a wrapper to do, then put the envelope of the blank application.

5, tag cards and stickers etc.

Very annoying device. But no difficulty, to be careful, accounting for good size. Divided into three categories:

(1) - (no bleeding), and business card is similar to that of all the outer edge needs bleeding;

(2) two knife cut (including bleeding);

(3) rolling box, punching, fillet (demand knife version, with 2 spelling);

(4) the mixed type, in the condition of the number of requirements, can be mixed together in the open space.

6, the following for beginners CD a friend recommended I use corner line drawing method is applicable, the original should be sent to the vector section, but because of this post and what relationship, sent here.

(1) the hand thing, press the Ctrl button in the upper left corner of the page (hair) to draw vertical line, and change the size of 3mm;

(2) Ctrl+A (alignment and distribution), D, T, L; [Note: in CD9, the following is the same as the Alt+A+A method.

(3) the X coordinate is changed to 3, and the number of the digital keyboard + number (keyboard is the most right) to copy a line;

(4) the X coordinates are changed to 6, and the two line segments are connected;

(5) copy and reverse the 90 degree;

(6) identify the X, Y axis coordinates by 3, a set of corner has been completed, and then the group of angular lines and press + button to copy, and then the extent of mirror;

(7) Ctrl+A, D, R, at this time not to use T, graphics for the extent of the move;

(8) select two groups of corner line, press the + copy, vertical mirror;

(9) Ctrl+A, D, B, and the side of the corner;

(10) finally, don't forget to add the CMYK color tender